In recent years, many car owners have done a popular coating service to protect his car for a long time. Some coatings manufacturers say that their products are plated, porcelain-plated, etc., in fact, they are all the same type of products, much the same! We will refer to it as a coating here! Back to the topic of this article to answer why it is not recommended to wash the car with sputum after doing the above protective film? We first analyze this problem from a scientific point of view. From the beginning of the coating process, the main raw material of the coating is aminofunctional polysiloxane or silica dioxide. These oily raw materials will not dry up. For lacquer finishes, it is necessary to mix different hardener solvents to convert those nanopolymers into plastic coatings. Different types of curing solvents are used, and the hardness of the film can be changed accordingly. In other words, if you need a hard film, use a harder curing agent. The 9H hardness on the market is made of a hard curing agent. Is the hard film better than a soft film? In the opposite question, if the hard is good, why does the car factory not use hard paint when producing cars? In fact, car paint is not the pursuit of hardness, is the physical phenomenon of pursuing its flexibility to withstand the temperature difference caused by the temperature difference made by the vehicle while walking on the road surface, to avoid the paint due to cold shrinkage The paint is cracked and made irreversible and needs to be painted. Back to the layer of coated film, with the excellent physical properties of the nano-film, but also has the shortcomings of the film. One of the weaknesses of the film is the loss of tension and permeability due to oxidation, then what will oxidize the film? ? The most rapid oxidation of the film is bismuth. Most of the car washes used in the market are sturdy. Because of its high oil repellency and economical efficiency, it is the reason that the coating manufacturer does not recommend the use of cleaning agents after the coating is finished. Car wash, because it is impossible to determine whether the car wash in the car wash shop uses a mild detergent!
It is because of the oxidization problem that cannot be solved by the above-mentioned coating film. Many international large-scale automobile beauty brand manufacturers have not introduced coating products in the market in the past, and only small-scale manufacturers in Asia have introduced such coatings. Until 2015, OG took the lead in solving the oxidation problem in the coating, and changed the film to a liquid crystal film. The liquid crystal film has all the advantages of nano-coating such as anti-fouling, water splashing, acid-resistant and so on, but it solves the oxidation of the coating. The ills, broke out in the automotive beauty industry, launched an epoch-making car beauty product!
NTI stores also have OG’s new nano-liquid crystal film service. The product service name is OGII double-drill film. Please check with NTI customer service staff for service details, or call 2345 2193 online customer service staff for service details.